See! This is the photo that shows 4 JXD RC Helicopters fly at the same time. They are controlled by 4 transmitters. That mean you can find you families and friends to enjoy the flight. Some may say that it is difficult to tune 4 Helicopters with 4 transmitters. Therefore RC Fever will show the full procedures, it’s easy to do!
Firstly, I will use the stickers to hold the position of helicopters.
You can see the left hand sides are two JXD 340s and the right hand sides are two JXD 335s.
Turn on the power of the orange one JXD 340.
Turn on the first JXD 340 transmitter (Band A) and maximize the throttle, the orange one JXD 340 will get the signal. Than minimize the throttle and prepare the blue JXD 340.
Turn on the second JXD 340 transmitter. (Band C)
Turn on the power of the blue one JXD 340.
Maximize the throttle and the blue JXD 340 will sense the signal. Than minimize the throttle and prepare the JXD 335s.
 |  |  |
 |  |  |
1. Turn on the corresponding transmitter. (Remember to use different band)
2. Turn on the corresponding helicopter.
3. Maximize the throttle until helicopter sense the signal.
4. Minimize the throttle and prepare other helicopters.
Than you can enjoy it with you friends and families, this article just show you how to fly four helicopters
Actually the number can increase. Such as 3 JXD 340s in 3 different bands, and 3 JXD 335s in 3 different bands, than you can have 6 helicopters fly at the same time controlled by 6 transmitter.
Click “HERE” to choose you own JXD Helicopter.
No comments:
Post a Comment