If you have a S107 and you want to charge your S107 appropriately and want a longer battery life, this article will help you. There are two methods for charging, the main focus is don’t charge you S107 for too longer, two method allow let you know when the battery is fully charged, then you can unplug your S107 as soon as possible.
Method One: Charge by the transmitter.
1. Connect the helicopter to transmitter. There is wire with plug from the life hand side of the transmitter.
2. Turn on the transmitter and red light bright indicates that the helicopter is charging.
3. After a while (about 40 minutes if the helicopter have used up the battery), green light show that the helicopter is fully charged. Remember don’t charge it for a long time as it will shorter the battery life.
Method Two: Charge through the USB cable.
1. Connect the USB cable to the computer first, red light bright show that the USB is ready for use.
2. Connect the USB cable to the helicopter and the red light disappear show that the helicopter is charging.
3. Red light bright again shows that the helicopter is fully charged. Remember don’t charge it for a long time as it will shorter the battery life.
Thanks So Much! Ive been looking for an article like this.
ReplyDelete